Stock # 07230

#2 BROWN & SHARPE SCREW MACHINE

Serial # 542-2-6713-1 5/8      New 1967      Model # 2

Spindle Capacity: 1-5/8" Diameter
Turning Length: Up to 3-1/2"
Drive: 4-Speed
Spindle Mounting: Preloaded Precision Ball Bearings
Spindle Motor HP: 7-1/2
Spindle Speed Range: 3 to 2906
Number of High Speeds: 17
High Speed Range: 219 to 2906 RPM
Number of Second Speeds for Each High Speed: 10
Ratio of High to Second Speeds: 1.2:1 to 5.1:1
Number of Third Speeds Available for Each High Speed: 15
Ratio of High to Third Speeds: 1.6:1 to 15.3:1
Number of Fourth Speeds: 150
Ratio of High to Fourth Speeds: 1.9:1 to 78:1
Drive Shaft Speed: 120 RPM Constant
Production Rates: 448
Time Required to Produce One Piece Per Cycle: 1-2/3 to 1000 Seconds
Minimum Cycle with Reversal: 6 Seconds
Number of Turret Holes: 8
Diameter of Tool Holes: 1"
Time Required for Indexing: 1/2 Second
Adjustment: 1" Screw Feed
Cross Slides Maximum Travel: 1-3/4"

EQUIPPED WITH:
Automatic Lubrication
Coolant System
(1) Ram Type Slide
Swing Stop for Stock Feed
Part Basket
Work Light
Single Bar Tube and Stand
Tooling
Reversing and Auxiliary Disconnect Switch for Spindle: Forward/Reverse
Hour Meter
Wired for 3 Phase, 60 Cycle, 230 Volts

Overall Size: 80" L-R x 48" F-B x 78" H x 5,000 Lbs.

Loaded on Truck, Our Warehouse, York, PA